Full GroLab Growing Pack:
GroLab Starter Kit:
-1 Temperature and humidity sensor
-Hortilab 120 from Hortiline
-Transformer XtraSun 600W
-Aircool XtraSun 150mm Reflector
-Philips Green Power 600W Lamp
-Neptune NH-2000 Water Pump
-Rechargeable charcoal filter Koalair 540m3 / h
-Extractor TT-150 Dual 450-550 m3 / h
-X2 Pulleys Easy Pickers Pulley
-X2 Tubes of 2 meters of 150mm
-X4 150mm clamps
-Set drip irrigation system with tubes, elbows and diffusers
Warning: Last items in stock!
This is a possible scheme of hundreds of possible combinations. You can connect all kinds of elements to the modules.
The combination of all GroLab modules provides a control capability never seen before. The modules communicate with each other simulating the operation of a brain. This capability offers the grower the ability to replicate its physical abilities in GroLab performing hundreds of tasks simultaneously.
This is a scheme designed to show some of the possibilities of control of each module. Keep in mind that the scheme is limited to the number of modules included in the following kit. You can add extra modules (GroNode supports up to 4 modules of each type) and expand your control with new features.
GroNode communicates with all modules through radio frequency signals. It stores all configurations, it receives information from the sensors and sends orders to each module.
PowerBot activates electrical elements. In this case it controls the lighting, extraction of stale and hot air, activates the water pump and finally the humidifier. Both the extractor as humidifier are activated depending the collected data by its temperature and humidity sensor.
Up to 2300W connected directly to PowerBot (by socket and total), or unlimited power using electrical contactors.
Connect any electric element to PowerBot and configure it to control the climate in your crop. Automates Extractors, heaters, humidifiers and / or dehumidifiers etc. Its temperature and humidity sensor will send all information to PowerBot to maintain microclimate completely stable.
Connect your water pump or your 220V Water valve to PowerBot to activate irrigation. This kit does not include SoilBot so it will be necessary to schedule irrigation. GroLab Software lets you create schedules for hours and days of the week. You can also create recurrences to automate your hydroponics system (eg, 5 minutes every 5 minutes).
- Turn off electrical elements that endanger safety at precise times.
- Check that the temperatures do not exceed the logical margins and act accordingly.
- It emits a loud beep if a security alarm is detected.
- Manage all security protocols.
- Send notices to computers connected to the local network with GroLab Software enabled.
- Send messages to multiple online platforms (Email, Twitter, Facebook), requires an Internet connection.
The limit is your imagination. You can add up to 4 modules of each type for each GroNode (the brain).
4 PowerBots equals 16 independent electrical connectors and four temperature and humidity sensors which can control up to 4 independent growing areas.
4 SoilBots provides 16 moisture sensors for substrate with which control multiple groups of plants. 8 substrate temperature sensors and 8 flood detectors. Each SoilBot Box comes with 2 humidity sensors, 1 temperature sensor and 1 flood detector. You can add the extra sensors you need.
4 TankBots give you the possibility to control up to 16 sensors of your choice (sensors that act as a switch) and 16 actuators of 12 or 24 volts with a maximum of 5 watts per output (delivered with a transformer 12v).
Hortilab 120 from Hortiline
It is a grow tent made with a super resistant material. Its metal structure is robust and stable. It has zips that maintain the opacity and the interior is lined with a reflective material that favors the propagation of light throughout the crop. The tent has side doors that facilitate access to it and small openings for electrical wiring and air extraction.
Dimensions: 120x120x200 cm
XtraSun 600W Transformer
- Fast and safe connections, electronic and silent additional ignition.
- Lower electrical losses and higher solubility.
- Base Schuco CEE 7/7 to ground of 1,5 meters.
- Cable of the IEC 50cm connection of the lamp (with possibility to lengthen).
- PTC thermal protection.
- Compatible with all lamps and reflectors on the market.
Power: 600 W
Frequency: 50 Hz
Aircool XtraSun 150mm Reflector
- Broad and bright diffusion of light.
- Fully equipped with a cooling air intake.
- Highly reflective European aluminum housing.
- Discreet design
- A pre-installed suspension assembly.
- CSA Certification
Philips Green Power 600W Lamp
Mixed spectrum lamp for growth and flowering.
Neptune NH-2000 Water Pump
These models are equipped with a thermostat that automatically disconnects the motor in case of overheating during use. Thanks to its engine with a special design, these models have a longer life and lower power consumption.
Compatible with fresh or marine water
Voltage: 220V-240V / 50Hz
Flow rate: 2000L / h
Maximum height: 2.5 m
Maximum depth: 2m
Dimensions: 10 x 15 x 9 cm
Koalair 540m3 / h Rechargeable Active Charcoal Filter
Contains high quality virgin activated carbon, 100% RC-4/8 Australian, made exclusively from mining in the collie basin mines in Western Australia. The coal extracted from these deposits is considered the oldest, pure and light and exists in the world.
Dimensions: 25.4 x 25.4 x 35cm
Capacity: 540m3 / h
Estimated duration: 17,000 hours
TT-150 Dual Extractor 450-550 m3 / h
It includes a new fixing system that allows removal of the extraction agent for cleaning without dismantling the fixing system. It is one of the quietest exhaust fans on the market!
Minimum 30W: 450m3 / h 33dBA
60W maximum: 550 m3 / h 44dBA
Easy Rollers Pulleys
They facilitate the lifting or alignment of reflectors, extractors and filters. It has a brake system that adjusts to the desired height in a practical and simple way.
No customer comments for the moment.